Memorial Massacre: Plant Robotics Scrimmage

Sign up to compete in the Memorial Massacre Robotics Scrimmage at Mixxer Community Makerspace!

Event Details:

• Duration: two-minute fights

  • 20 guaranteed between fights. 1 deferment allowed per robot.

• Judging: 3 judge panel using 5-4 (damage, engagement) metric. Damage is worth 4 points while engagment is worth 5. Each judge picks a winner.

  • (There is a possibility that Drew will judge all the fights)

• Cage: 6' x 6’ with steel floors

• Modified double elimination (single final fight)

  • Depending on the number of competitors in a given weight class, a modified swiss bracket may be used instead.

• Bring your own power strip.  Pit tables will be shared with 4 competitors. Your equipment and storage will need to stay within the table volume.

• Live Stream will be available if possible

• Accommodations may be made upon request

• Awards: Trophies presented Sunday night, when final fight ends.

  • Trophies for 1st through 3rd place 

  • Trophies will also be given to the most destructive robot and the most destroyed robot

Schedule: 

Sunday, May 24th:

• 11:00 am - 12:30 pm: Safety Inspections

• 12:30 pm: Builder's Meeting 

• 1:00 pm: Fighting Begins

  • Lunch will not be provided, but there will be a break for competitors to grab food from the 15+ local food trucks that will be at the event.

Registration Details:

• Fee: $20 per robot due at registration

  • Includes 2 pit passes per robot

  • Only one robot per driver per weight class, please.

• Team Members: Please be ready with your team name, robot names, and all team member names at registration

• Liability Waivers: All team members must fill out BOTH the Combat Robotics Waiver and the Mixxer Community Makerspace Waiver. Physical versions will be available at the door, or complete them prior with the links below.

  • Mixxer Community Makerspace Waiver: Digital

  • Combat Robotics Waiver: Printable

• Team Guests: Please have any non-competing guests fill out the Mixxer Community Makerspace Waiver

  • Optional- If you know the names of your guests, please provide them at registration for quicker check-in.

• Media Release: Included in the Mixxer Community Makerspace Waiver is a consent for photos and videos taken of the event to be used for advertising, social media, etc. Please be aware that staff & volunteers will be recording throughout the duration of the event.

  • A shared photo/video library will also be available after the competition

• Waitlist: Robots on the waitlist will be contacted on a first-come, first-served basis upon a robot dropping out.

• Event Logistics: Registered builders will receive an email in the week leading up to the event with more information

Robot Rules:

• 900 MHz, 2.4GHz, or spectrum radios required. Anything else needs prior approval

• No flame weapons, no gas-powered robots. SPARC v1.5 rules apply

• All Lipo batteries must be in a closed LiPo bag while charging

• A visible weapon lock is required for all weapons.

• A switch and power light are required. A jumper is acceptable in place of a switch if it can be easily and quickly connected

• Only one robot per driver per weight class please.

• Controlled motion is defined as the ability to move from one corner of the arena to the opposite corner in less than one minute. 

• If you can't pass safety or get within weight by 12:30, you will have to use your postponment.

• If a part of your bot causes entanglement to your opponent more than 2 times in a fight, the fight will go to a judges decision with the judges deducting 1 point from whatever your damage score was when the 2nd entaglment occured. This rule only applies if the entanglement was caused by the same component of your bot.

Plastic Ant rule clarifications:

• Sparc v1.5 plastic ant rules

• Must be 3D printed plastic

• PET, PETG, ABS, PLA, PLA+, HIPS are the only materials that can be used for the chassis and weapons. Composites are not allowed with the exception of the carbon fiber motor mounts commonly used to mount 16mm drive motors.

• No other types of plastics or materials are allowed

• Foam, Lego, or other Sparc v1.5 wheels are allowed. TPU & cast wheels are acceptable. TPU may not be used for any components other than wheels.

• If it can be touched, it must be plastic. It is acceptable to epoxy, tape, or screw 3D printed components together and heads of the screws to be visible if they're only used for minimal support (i.e., attaching the top onto the sides of the robot, gluing 3D printed parts together at the seam if they'd be bigger than your print bed, etc.) 

• Motors, electronics, axles, fasteners and adhesives can be any reasonable material but cannot be used in such a way to enhance the structural integrity, armor the robot, or enhance any weapon.

• Robot may be disqualified at the Event Organizer’s discretion if it is deemed to violate the spirit of the class. Contact the event organizer ahead of time if you are not sure your robot meets the above definition. 

Mixxer Community Makerspace Policies

• The 3 most important rules: Be Kind, Be Safe, and Have Fun

• Anyone under the age of 16 years old must be accompanied by an adult

• Food and beverages are permitted in the building

  • No alcoholic beverages permitted on the premises

• Guests may only use the tools they have been authorized to use and must stay within the authorized shop areas

• No animals are permitted inside the building with the exception of service animals

Important Note: This event will be held while Mixxer is open to the public for the Winston-Salem Food Truck Festival. A high volume of visitors will be coming through that day and Mixxer staff will be unable to check in all visitors. We will be sectioning off the pit area as best we can, but please keep an eye on your property. Mixxer is not responsible for any damaged or stolen property.

Competition Information & Robot Rules

Just getting started with combat robotics? Take a look at the general ruleset here

Want to join in on in-depth discussions and updates before the event? Join NC/Triangle Area Discord 

Please email Robotics@wsmixxer.org with any questions leading up to the event.